Before you start to install the PCT-MODEM, you should download the driver
This driver is support MODEM AIWA 32k only. Other modems, please
refer to the driver which will give with your modem and manual. This driver
can use onWindows 98 and Windows ME
PCT Modem with 32 Kbps: You must have the following components.
For more details about Modem AIWA 32K Please visit :
H-Series ( Sanyo, Kyocera F-10)
Ready Modem (AIWA USB Modem)
or Notebook with USB Port
the file modem_aiwa.zip to C:\AIWA
the modem AIWA 32K to PCT Via DATA Port.
the modem to the PC via USB port.
- It should
found new USB devices
At the first picture, USB device is detected, and it will prompt to
put the driver of the AIWA modem as the second picture.
- After select
the correct folder for the modem driver, then click OK, it should
install AIWA modem in your computer.
- Double click
on Control Panel and double click on Modem , you should
see a modem PV-HKU6401. Click on Diagnostics tab.
- Click on
Port which attach to modem PV-HKU6401, then click on More
- You will
see More Info.. page which contains ATI information as below.
(It may be defferent in other PCT modem).
connection for modem PCT
- Double click
on My Computer
Networking , then double click on Make New Connection.
- Name the
Dial-Up Networking icon as CSLoxInfo replacing My Connection.
- Select the
modem PV-HKU6401 from Select a Devices then click Next.
- Leave Blank
in the Area code box.
- Put the
number 026234040 in the Phone Number.
- Choose Thailand
(66) from Country or region code, then click Next.
- Click Finish.
on CSLoxInfo icon, then choose Properties.
- Click Server
the box next to Logon to Network, NetBEUI and IPX/SPX Compatible. Leave
the check mark for Enable Software Compression and TCP/IP , then click
OK button twice.
- Now the
CSLoxInfo connection should be ready to use to Connect. Make sure that
the PCT is turned on and attach with modem via DATA Port and the modem
is attached to USB Port on PC.
- If everything
is OK, Double click on CS Loxinfo icon, then Put your User Name and Password,
for example :
: Useremail@example.com (e.g. firstname.lastname@example.org)
Password : xxxxxxxx
- Check if you are calling to the right number. Then
click Connect button.
- It will
take about 10 seconds to establish the connection.